 |
» |
|
|
|
Solaris on ProLiant - Certified & supported versions
Click on the product to obtain product information, downloads, certifications, and documentation.
Click on the Check box to go directly to the HP software download page for the server.
If the server or version of Solaris is not located on this matrix, please refer to the 'archive' tab below.
|
|
Sun Test Suite Certified and HP supported
|
|
|
|
|
|
(2)
|
Limited to 32-bit support only.
|
- In certain hardware configurations of these servers, processor hyperthreads may not be available under Solaris 10 1/06. The Solaris 10 6/06 release corrects this issue.
- In certain hardware configurations of these servers running the Solaris 10 1/06 release, some devices may not be recognized (such as the Smart Array controller) or Solaris may appear to hang during boot. A workaround for such symptoms is to set the "pci-reprog" option to a value of "off." This may be done on the GRUB "kernel" line (such as when booting Solaris from CD-ROM):
kernel ... -B install-media=cdrom,pci-reprog=off
- This option may need to be set during installation in order to successfully install the operating system. This option may also be persistently set using the eeprom (1M) command (once installation is complete).
- Kernel patch 118855-19 should be applied when running Solaris 10 1/06 or Solaris 10 6/06 on these servers in order to improve system stability when the following Intel Xeon processor models are used: 5110, 5120, 5130, 5140, 5150, and 5160.
|
|
|
|
Printable version
